Aqua-Flo XP2 2.0hp Impeller (3hp USA) - 91694300
Aqua-Flo XP2 2.0hp Impeller (3hp USA) - 91694300 is temporarily out of stock and will ship as soon as it's available.
Don't Guess - Ask Us!
Don't Guess - Ask Us!
Not sure if it’s the right part? Send us a message and a photo of what you’re replacing, or what you need, and we’ll help make sure you get the right part the first time.
Delivery and Shipping Info
Delivery and Shipping Info
Free Shipping over $149 for most products. Choose Express Post where available for fastest shipping!
Warranty Information
Warranty Information
Aqua-Flo XP2 2.0hp Impeller (3hp USA) - 91694300 is temporarily out of stock and will ship as soon as it's available.
Aqua-Flo XP2 2.0hp Jet Booster Pump Impeller, 3hp USA, Part 91694300
This is the Aqua-Flo (Aquaflo) XP2 impeller for the 2.0hp Australian 50Hz Flo-Master XP2 spa jet booster pump, marked 3.0hp on 60Hz USA pumps. Part number 91694300, identified by two green dots on the impeller shaft sleeve. This is the second most common XP2 impeller on Australian spas, after the 2.5hp 91694400. The XP2 and XP2E are different pumps and their impellers are not interchangeable, so if yours is an XP2E see the XP2E impeller range instead.
- Physically Stocked, unlike most "drop-shipping" websites.
- Shipped from VIC, NSW, WA, QLD
Identify Your Impeller Before You Order (rule XP2IMP-1.0)
Aqua-Flo size XP2 impellers by coloured dots on the impeller shaft sleeve, which protrudes from the back of the wet end. Confirm on the dots and the vane width rather than on horsepower alone:
- Read the pump label. Australian 50Hz and USA 60Hz pumps are rated differently. This impeller suits a pump labelled 2.0hp in Australia or 3.0hp in the USA.
- Find the dots on the shaft sleeve. This impeller carries two green dots on the rear of the shaft sleeve, visible where it protrudes from the back of the wet end.
- Measure the old impeller across the outside of the vanes. This one is 112mm diameter with a 10.7mm vane width. The 1.5hp is also 112mm but has a much narrower 7mm vane, so check the vane width as well as the diameter.
Specifications
- Part number: 91694300
- Suits: Aqua-Flo Flo-Master XP2 spa jet booster pump, 2.0hp AU 50Hz
- USA 60Hz equivalent: 3.0hp
- Shaft sleeve marking: two green dots
- Diameter: 112mm
- Vane width: 10.7mm
- Brand: Aqua-Flo, Gecko Alliance
Choose Your XP2 Size
You are viewing the 2.0hp, part 91694300. Aqua-Flo list six XP2 impellers:
| Size (AU 50Hz) | USA 60Hz | Shaft sleeve dots | Diameter | Vane width |
|---|---|---|---|---|
| 0.75hp - 91694110 | 1.0hp | 1 orange | 98mm, 7 vanes | 7mm |
| 1.0hp - 91694150 | 1.5hp | blue, green and yellow | 103mm, 7 vanes | 8mm |
| 1.5hp - 91694200 | 2.0hp | 2 blue | 112mm | 7mm |
| 1.75hp - 91694251 | 2.5hp | 2 white | not recorded | 8.8mm |
| 2.0hp - 91694300 | 3.0hp | 2 green | 112mm | 10.7mm |
| 2.5hp - 91694400 | 4.0hp | 2 white with 1 green between | 114mm | 12mm |
The 2.5hp 91694400 is the most common XP2 impeller on Australian spas and this 2.0hp 91694300 is the second most common. The 2.5hp is also quoted as 4.8BHP on some Spa Industries spas. The 1.75hp was not fitted to current Australian 50Hz pumps but was used on Aquaswim pumps in the past.
Related XP2 Parts
- Mechanical seal, 5/8" Type 6 - fit a new seal whenever the impeller comes off (buy here)
- Wear ring 92830070 - flanged wear ring for the XP2 series (buy here)
- Body o-ring 92200300 - wet end body seal, XP2 and XP2E (buy here)
- Union o-ring 92200210 - pump union seal, XP2 and XP2E (buy here)
- 2" pump union and o-ring (buy here)
- Pump itself discontinued? See the Aqua-Flo XP2 and XP2E obsolete pump replacement guide
When to Replace
Replace the impeller when the vanes are worn, chipped or broken, when the throat has worn oversize, or when jet pressure has fallen away with a clean filter and no air leak. A worn impeller and a worn wear ring usually go together, so check both while the wet end is open. Always fit a new mechanical seal at the same time, because the seal faces bed in against each other and generally leak once disturbed.
Frequently Asked Questions
How do I confirm this is the 2.0hp impeller?
Look for two green dots on the rear of the impeller shaft sleeve where it protrudes from the back of the wet end, and measure the impeller at about 112mm across the outside of the vanes with a 10.7mm vane width.
The 1.5hp and the 2.0hp are both 112mm. How do I tell them apart?
By the dots and the vane width. The 2.0hp carries two green dots and a 10.7mm vane. The 1.5hp carries two blue dots and a much narrower 7mm vane.
My pump label says 3.0hp. Is this the right impeller?
Yes, if it is a USA 60Hz pump. Australian 50Hz pumps do not use a 3.0hp label on the XP2.
Will this fit an XP2E pump?
No. The XP2 and XP2E use different impellers. See the XP2E impeller range.
Before ordering: confirm this part is correct for your equipment. Seek professional assistance, or contact us with photos of your existing impeller and the pump label, including model and serial numbers. As with all products, this must be diagnosed and fitted by a qualified and experienced person.
Common search terms: Aqua-Flo 91694300, Aquaflo 91694300, XP2 2hp impeller, XP2 3hp impeller USA, Flo-Master XP2 impeller two green dots, 112mm spa pump impeller, Aquaflo jet pump impeller, WWDG SpaPro.
To the layperson, plumbing sizes and their names can be confusing due to the nominal sizes and naming conventions used.
This is not something we made up. Plumbers and manufacturers have used nominal (meaning ‘by name only’) sizing for decades.
Simply put, in plumbing, named sizes are often not the actual measurements of the pipe, fitting, or part. A PVC pipe called “50mm” or “2"” does not measure 50 mm anywhere. Instead, it follows nominal sizing, an internationally-standardised naming system.
Almost all fittings we use in the pool & spa industry use “pressure PVC” pipe & fittings. Do not confuse with “DWV” or other pipe & fittings and their names and sizes.
Use the Outside Diameter (OD) to check your pipe against fittings. Below is a quick reference for common spa & pool pipe sizes:
| Imperial Name | Metric Name | Pipe Diameter (OD) |
|---|---|---|
| 1/2" | 15mm | ~21.2–21.5 mm |
| 3/4" | 20mm | ~26.6–26.9 mm |
| 1" | 25 mm | ~33.4–33.7 mm |
| 1.5" | 40 mm | ~48.1–48.4 mm |
| 2" | 50 mm | ~60.2–60.8 mm |
| 2.5" | 65 mm | ~75.2–75.5 mm |
To reiterate, these are nominal sizes and are designed to fit matching fittings — not to measure what their name suggests. These are based on PVC Pressure Pipe AS/NZ 1477 Dimensions1.
- º Internal diameters vary slightly by manufacturer and class.
- 1 Not all pool/spa fittings match these dimensions exactly. Some do not follow Australian or international standards. Chinese spas may use proprietary fittings.
Understanding Plumbing Sizes & Nominal Measurements
Plumbing sizes can be confusing. PVC and many other pipe systems use nominal sizes—the size is a name, not the exact measured dimension. This convention is used across most pool and spa systems and other plumbing areas so that pipes and fittings remain compatible.
Why pipe sizes don’t match the measurements
The Nominal Pipe Size (NPS) system standardises pipe dimensions so that pipes, fittings, valves, and accessories interoperate.
Plumbers work with these nominal names every day, but DIYers can be tripped up if they try to match by a tape-measure alone.
How to Measure Pipe Correctly
-
Pipe size is identified by:
- The pipe’s Outside Diameter (OD).
- The fitting’s Inside Diameter (ID) (socket opening).
- Pipe Class / Schedule (e.g., Class 9, 12, 18 or Sch 40) relates to wall thickness and therefore the Internal Diameter (ID) and pressure rating.
- The outside diameter of a fitting is not useful (wall thickness varies by manufacturer).
Hose & Tube Dimensions
Common flexible hose sizes used in pool/spa systems (approximate IDs).
| Imperial Name | Metric Name | Inside Diameter (ID) |
|---|---|---|
| 3/8" | 9–10 mm | ~9 mm |
| 3/4" | 19 mm | ~19 mm |
BSP – British Standard Pipe Thread Sizes
BSP thread names are also nominal. The thread OD will not equal the nominal name.
| BSP Thread Size Naming | Outside Diameter (mm / inch) | TPI |
|---|---|---|
| 1/16" BSP | 7.7 mm / 0.304" | 28 |
| 1/8" BSP | 9.7 mm / 0.383" | 28 |
| 1/4" BSP | 13.16 mm / 0.518" | 19 |
| 3/8" BSP | 16.66 mm / 0.656" | 19 |
| 1/2" BSP / 15 mm | 20.99 mm / 0.825" | 14 |
| 5/8" BSP | 22.99 mm / 0.902" | 14 |
| 3/4" BSP / 20 mm | 26.44 mm / 1.041" | 14 |
| 7/8" BSP | 30.20 mm / 1.189" | 14 |
| 1" BSP / 25 mm | 33.25 mm / 1.309" | 11 |
| 1-1/4" BSP | 41.91 mm / 1.650" | 11 |
| 1-1/2" BSP / 40 mm | 47.80 mm / 1.882" | 11 |
| 2" BSP / 50 mm | 59.61 mm / 2.347" | 11 |
| 2-1/4" BSP | 65.71 mm / 2.587" | 11 |
| 2-1/2" BSP | 75.18 mm / 2.960" | 11 |
| 3" BSP | 87.88 mm / 3.460" | 11 |
| 4" BSP | 113.03 mm / 4.450" | 11 |
| 5" BSP | 138.43 mm / 5.450" | 11 |
| 6" BSP | 163.83 mm / 6.450" | 11 |
Payment & Security
We accept: Visa, Mastercard, Amex, Apple Pay, Google Pay, ShopPay, Paypal, Zip, Afterpay
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
g-91694300


