Most Physical Stock - from Vic, NSW, Qld, WA

Great Prices. Most Parts. No Gimmicks.

Aqua-Flo XP2 0.75hp Impeller (1hp USA) - 91694110

FREE SHIPPING OVER $149 (T&Cs)

Regular price $115.00
Tax included Shipping calculated at checkout.

Don't Guess - Ask Us!

Not sure if it’s the right part? Send us a message and a photo of what you’re replacing, or what you need, and we’ll help make sure you get the right part the first time.

Delivery and Shipping Info

Free Shipping over $149 for most products. Choose Express Post where available for fastest shipping!

Free, Flat Rate & Express Post Shipping Information.

Warranty Information

Aqua-Flo XP2 0.75hp Jet Booster Pump Impeller, 1hp USA, Part 91694110

This is the Aqua-Flo (Aquaflo) XP2 impeller for the 0.75hp Australian 50Hz Flo-Master XP2 spa jet booster pump, marked 1.0hp on 60Hz USA pumps. Part number 91694110, identified by a single orange dot on the impeller shaft sleeve. The XP2 and XP2E are different pumps and their impellers are not interchangeable, so if yours is an XP2E see the XP2E impeller range instead.

  • Physically Stocked, unlike most "drop-shipping" websites.
  • Shipped from VIC, NSW, WA, QLD

Identify Your Impeller Before You Order (rule XP2IMP-1.0)

Aqua-Flo size XP2 impellers by coloured dots on the impeller shaft sleeve, which protrudes from the back of the wet end. Confirm on the dots and the diameter rather than on horsepower alone:

  1. Read the pump label. Australian 50Hz and USA 60Hz pumps are rated differently. This impeller suits a pump labelled 0.75hp in Australia or 1.0hp in the USA.
  2. Find the dots on the shaft sleeve. This impeller carries one orange dot.
  3. Measure the old impeller across the outside of the vanes. This one is 98mm diameter, 7 vanes, 7mm vane width.

Specifications

  • Part number: 91694110
  • Suits: Aqua-Flo Flo-Master XP2 spa jet booster pump, 0.75hp AU 50Hz
  • USA 60Hz equivalent: 1.0hp
  • Shaft sleeve marking: one orange dot
  • Diameter: 98mm
  • Vanes: 7
  • Vane width: 7mm
  • Brand: Aqua-Flo, Gecko Alliance

Choose Your XP2 Size

You are viewing the 0.75hp, part 91694110. Aqua-Flo list six XP2 impellers:

Size (AU 50Hz) USA 60Hz Shaft sleeve dots Diameter Vane width
0.75hp - 91694110 1.0hp 1 orange 98mm, 7 vanes 7mm
1.0hp - 91694150 1.5hp blue, green and yellow 103mm, 7 vanes 8mm
1.5hp - 91694200 2.0hp 2 blue 112mm 7mm
1.75hp - 91694251 2.5hp 2 white not recorded 8.8mm
2.0hp - 91694300 3.0hp 2 green 112mm 10.7mm
2.5hp - 91694400 4.0hp 2 white with 1 green between 114mm 12mm

The 2.5hp 91694400 is the most common XP2 impeller on Australian spas and the 2.0hp 91694300 is the second most common. The 2.5hp is also quoted as 4.8BHP on some Spa Industries spas. The 1.75hp was not fitted to current Australian 50Hz pumps but was used on Aquaswim pumps in the past.

Related XP2 Parts

When to Replace

Replace the impeller when the vanes are worn, chipped or broken, when the throat has worn oversize, or when jet pressure has fallen away with a clean filter and no air leak. A worn impeller and a worn wear ring usually go together, so check both while the wet end is open. Always fit a new mechanical seal at the same time, because the seal faces bed in against each other and generally leak once disturbed.

Frequently Asked Questions

How do I confirm this is the 0.75hp impeller?
Look for a single orange dot on the impeller shaft sleeve at the back of the wet end, and measure the impeller at about 98mm across the outside of the vanes with a 7mm vane width.

My pump label says 1.0hp. Is this the right impeller?
It depends which market the pump was built for. A USA 60Hz pump labelled 1.0hp takes this impeller. An Australian 50Hz pump labelled 1.0hp takes the 1.0hp 91694150 instead. Match on the dots if you are unsure.

Is this the same as the 1hp FMHP impeller?
No. The dimensions are the same but the XP2 throat is a wider diameter, so the two are not interchangeable. For a Circmaster CMCP, CMHP or FMHP pump, order the Circmaster impeller.

Will this fit an XP2E pump?
No. The XP2 and XP2E use different impellers. See the XP2E impeller range.

Before ordering: confirm this part is correct for your equipment. Seek professional assistance, or contact us with photos of your existing impeller and the pump label, including model and serial numbers. As with all products, this must be diagnosed and fitted by a qualified and experienced person.

Common search terms: Aqua-Flo 91694110, Aquaflo 91694110, XP2 0.75hp impeller, XP2 1hp impeller USA, Flo-Master XP2 impeller orange dot, 98mm spa pump impeller, Aquaflo jet pump impeller, WWDG SpaPro.

Payment & Security

We accept: Visa, Mastercard, Amex, Apple Pay, Google Pay, ShopPay, Paypal, Zip, Afterpay

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

g-91694110

Contact Us