Spanet SV Mini 2 Controller Only - Control Box

Spanet SV Mini 2 Controller Only — Control Box

The SpaNet PowerSMART SV Mini 2 control box on its own, supplied with a 3m 15 amp supply lead. This is the electronics enclosure only — the remote heater and the touchpad are separate items and are not included. Order this when the original SV Mini 2 box has failed, been water damaged or been hit by a surge, and the heater, touchpad, pumps and light are all still serviceable.

• Physically Stocked, unlike most 'drop-shipping' websites.
• Shipped from VIC, NSW, WA, QLD

Mini 1 or Mini 2? Count the pumps

The two SV Mini models share a case, a heater range and a feature set. The difference is how many accessories they can switch.

What the SV Mini 2 can run

230V output sockets:

• PUMP 1 — circulation pump, 1-speed pump or 2-speed pump. This is the pump that must push water through the heater.
• PUMP 2 — 1-speed jet pump, 10A max.
• PUMP 3 — 1-speed jet pump, 10A max.
• BLOWER — 4.5A max. Supports variable / ramping speed on most spa blowers.
• 230V — constant, non-switched outlet for an ozone or UV sanitiser.

Low voltage ports

• 1 x touchpad port — SV Mini 2 uses the 8-button touchpad
• 1 x light port — SpaNet SV series LED lights only (2.5" or 5")
• 1 x heat pump port — plug-and-play to an SV series heat pump
• 1 x WiFi port — for the SV SmartLINK module

Features

• In-heater temperature sensor
• Maximum set temperature 41°C
• Dynamic Thermal Tuning — the thermostat point adapts to the spa and its environment to cut demand heat cycling
• Smart Filtration — recognises filtration that happens during heating and trims the programmed cycles accordingly. Daily runtime programmable from 1 to 24 hours
• Auto daily sanitise cycle — runs all pumps and the blower in sequence to purge lines and sanitise the full water volume
• Programmable sleep timer
• Programmable load shedding
• Heat pump interface — heat or cool from 10°C to 40°C, with automatic heat pump detection and element disable
• WiFi ready for SV SmartLINK and the SpaLINK app (iOS and Android)

Specifications

• Model: SpaNet SV Mini 2 (SVM2)
• Part number: SN-SVM2
• Supply: 230-240V AC, 1 phase, 50/60Hz
• Supply lead: 3m, 15 amp plug fitted. Can be hardwired to 25A by a licensed electrician
• Maximum current: 25A
• Suits remote heater: 1.5kW, 2.0kW or 3.0kW
• Control box: approx. 315mm W x 210mm H x 85mm D
• Weight: approx. 5kg
• Heater and touchpad: not included

Spa control systems this replaces

The SV Mini 2 is SpaNet's standard retrofit for multi-pump spas. It is commonly fitted in place of:

• SpaNet XS-2000 and XS-3000 (both obsolete and no longer supported)
• Davey Spa-Quip (SpaQuip) Spa Power 750, 1000 and 2000
• Ampac / Pulsar SQ1000, SQ1500 and Monarch Deluxe Command controls
• Gecko MicroSpa and U-Class packs on two-pump spas
• SpaPro and WWDG multi-pump control systems where the original board is no longer available
• Unbranded and OEM-rebadged packs on Sapphire, Oasis, Vortex, Alpine, Sunrans and similar imported spas, provided the pump count matches

Note the limit: if you are replacing an XS-3000 running a circ pump plus three jet pumps and a blower, the SV Mini 2 is not enough. That spa needs an SV3, which is a larger job.

A retrofit is not a like-for-like swap. Pump cordsets, the touchpad cut-out and the light will usually all need attention — see the parts list below.

Parts you may also need

• SV Mini remote heater: 1.5kW, 2.0kW or 3.0kW
• SV Mini 2 rectangular touchpad (8-button) or the SV Mini 2 bone touchpad
• Touchpad adaptor facia — covers the old touchpad hole on a retrofit
• Overmoulded AMP cordsets — 3-wire for 1-speed pumps, blowers and ozone; 4-wire for 2-speed pumps
• SV Mini heater barrel union
• SV SmartLINK WiFi module
• SpaNet SV LED lights: 2.5" / 63mm, 5", or light only
• Prefer the complete package? See the SV Mini 2 retrofit kit with heater and touchpad included.

Questions we get asked

Does this include the heater?
No. The SV Mini 2 uses a remote heater that plugs into the control box, and it is sold separately in 1.5kW, 2.0kW and 3.0kW.

Does it include a touchpad?
No. The SV Mini 2 takes the 8-button touchpad, ordered separately in rectangular or bone.

Will a SV Mini 1 touchpad work on this?
No. The Mini 1 touchpad is 6-button and the Mini 2 is 8-button. They are not interchangeable.

Can it be hardwired instead of plugged in?
Yes. The SV Mini 2 can be hardwired to a 25A supply by a licensed electrician, which is the usual approach when three pumps and a blower are all fitted.

Can I run two 2-speed jet pumps?
No. Pump 1 supports 1 or 2-speed; Pump 2 and Pump 3 are 1-speed outlets only, 10A maximum each.

Can I use my existing spa light?
Only if it is a SpaNet SV series LED light. Older 2-wire lights and other brands will not run from the SV Mini light port. If you have an older SpaNet round-pin light plug it can be re-terminated to RJ — see the SpaNet tech note. Otherwise fit a new SV series light.

Is the board repairable instead?
Sometimes. We offer a spa controller repair assessment for SpaNet Mini 1, Mini 2, SV2, SV3 and SV4 systems.

SV Mini installation and user manual. Confirm the product is correct before ordering. Contact us if unsure.

Common search terms

Spanet SV Mini 2 controller only, SN-SVM2, SVM2, SV Mini 2 control box, Spanet mini 2 control box, Spanet SV Mini 2 replacement controller, XS-3000 replacement controller, Spa Power 1000 replacement, Ampac Pulsar replacement controller, Spanet spa controller box, PowerSMART SV Mini 2, SpaPro control box replacement, WWDG spa control box.

To be fitted by a licensed, qualified and experienced person.