Astralpool Viron eQuilibrium Power PCB - SP71404 / 71404 - EQ18, EQ25, EQ35 & EQ45 - Genuine Chlorinator Spare Part
Astralpool Viron eQuilibrium Power PCB - SP71404 / 71404 - EQ18, EQ25, EQ35 & EQ45 - Genuine Chlorinator Spare Part is temporarily out of stock and will ship as soon as it's available.
Associated with these models
Open a diagram to see where this part sits and what else is in the assembly.
Don't Guess - Ask Us!
Don't Guess - Ask Us!
Not sure if it’s the right part? Send us a message and a photo of what you’re replacing, or what you need, and we’ll help make sure you get the right part the first time.
Delivery and Shipping Info
Delivery and Shipping Info
Free Shipping over $149 for most products. Choose Express Post where available for fastest shipping!
Warranty Information
Warranty Information
Astralpool Viron eQuilibrium Power PCB - SP71404 / 71404 - EQ18, EQ25, EQ35 & EQ45 - Genuine Chlorinator Spare Part is temporarily out of stock and will ship as soon as it's available.
Astralpool Viron eQuilibrium Power PCB SP71404
Genuine Astralpool SP71404 power PCB for the controller of the Astralpool Viron eQuilibrium salt chlorinator. Astralpool lists it as PCB-POWER EQ CHLOR, and it is item 6 in the exploded parts diagram for the Viron eQuilibrium salt chlorinator. Astralpool uses the part number in both the SP-prefixed and bare forms, SP71404 and 71404; they are the same board.
- Genuine Authorised Fluidra Dealer & Warranty Agent
- We carry more spare parts than anyone.
Compatibility list
Astralpool lists a single power PCB for the eQuilibrium controller covered by this parts diagram:
- Astralpool Viron eQuilibrium EQ18
- Astralpool Viron eQuilibrium EQ25
- Astralpool Viron eQuilibrium EQ35
- Astralpool Viron eQuilibrium EQ45
This board is not the user or display PCB. If the fault is with the buttons or the screen rather than the power side, you need SP71401 (buy here).
Control boards change across production runs. Before ordering, check the model and serial number on the controller label and the number printed on your existing board, and send us a photo if there is any doubt.
When to replace it
- Controller completely dead with a known good power supply at the outlet
- Visible burnt, scorched or swollen components or tracks on the board
- Cell output missing or erratic with a known good cell and cell cable
- Water ingress, corrosion or ant damage across the board
Specifications
- Part number: SP71404, also listed as 71404
- Type: Power PCB (power supply board)
- Diagram reference: Item 6
- Suits: Astralpool Viron eQuilibrium EQ18, EQ25, EQ35 and EQ45 chlorinators
- Brand: Astralpool, a Fluidra brand
Related parts
- SP71401 - Viron eQuilibrium user / display PCB (buy here)
- 2030037 - Viron and eQuilibrium controller cooling fan (buy here)
- SP714001 - Viron, eQuilibrium and Halo cell cable (buy here)
See the full Astralpool Viron eQuilibrium salt chlorinator parts diagram.
Before ordering
Confirm this part is correct for your equipment before ordering. Use the catalogue below, seek professional assistance, or contact us with photos of your existing part, model details, serial numbers and any labels.
The controller runs on mains power. As with all products, this must be diagnosed and fitted by a qualified and experienced person, with the controller switched off and unplugged before the enclosure is opened. Warranty details are on our warranty information page.
Manufacturer Catalogues, Diagrams & Part Numbers
Need exploded views, spare part numbers, product numbers, diagrams, or more product information? See the manufacturer catalogues: Astralpool Catalogue 2026 | Zodiac Catalogue 2026
Common search terms: Astralpool SP71404, 71404, eQuilibrium power PCB, EQ power board, Viron EQ chlorinator PCB, EQ25 power board, EQ35 circuit board, Astral chlorinator power supply board, WWDG SpaPro.
To the layperson, plumbing sizes and their names can be confusing due to the nominal sizes and naming conventions used.
This is not something we made up. Plumbers and manufacturers have used nominal (meaning ‘by name only’) sizing for decades.
Simply put, in plumbing, named sizes are often not the actual measurements of the pipe, fitting, or part. A PVC pipe called “50mm” or “2"” does not measure 50 mm anywhere. Instead, it follows nominal sizing, an internationally-standardised naming system.
Almost all fittings we use in the pool & spa industry use “pressure PVC” pipe & fittings. Do not confuse with “DWV” or other pipe & fittings and their names and sizes.
Use the Outside Diameter (OD) to check your pipe against fittings. Below is a quick reference for common spa & pool pipe sizes:
| Imperial Name | Metric Name | Pipe Diameter (OD) |
|---|---|---|
| 1/2" | 15mm | ~21.2–21.5 mm |
| 3/4" | 20mm | ~26.6–26.9 mm |
| 1" | 25 mm | ~33.4–33.7 mm |
| 1.5" | 40 mm | ~48.1–48.4 mm |
| 2" | 50 mm | ~60.2–60.8 mm |
| 2.5" | 65 mm | ~75.2–75.5 mm |
To reiterate, these are nominal sizes and are designed to fit matching fittings — not to measure what their name suggests. These are based on PVC Pressure Pipe AS/NZ 1477 Dimensions1.
- º Internal diameters vary slightly by manufacturer and class.
- 1 Not all pool/spa fittings match these dimensions exactly. Some do not follow Australian or international standards. Chinese spas may use proprietary fittings.
Understanding Plumbing Sizes & Nominal Measurements
Plumbing sizes can be confusing. PVC and many other pipe systems use nominal sizes—the size is a name, not the exact measured dimension. This convention is used across most pool and spa systems and other plumbing areas so that pipes and fittings remain compatible.
Why pipe sizes don’t match the measurements
The Nominal Pipe Size (NPS) system standardises pipe dimensions so that pipes, fittings, valves, and accessories interoperate.
Plumbers work with these nominal names every day, but DIYers can be tripped up if they try to match by a tape-measure alone.
How to Measure Pipe Correctly
-
Pipe size is identified by:
- The pipe’s Outside Diameter (OD).
- The fitting’s Inside Diameter (ID) (socket opening).
- Pipe Class / Schedule (e.g., Class 9, 12, 18 or Sch 40) relates to wall thickness and therefore the Internal Diameter (ID) and pressure rating.
- The outside diameter of a fitting is not useful (wall thickness varies by manufacturer).
Hose & Tube Dimensions
Common flexible hose sizes used in pool/spa systems (approximate IDs).
| Imperial Name | Metric Name | Inside Diameter (ID) |
|---|---|---|
| 3/8" | 9–10 mm | ~9 mm |
| 3/4" | 19 mm | ~19 mm |
BSP – British Standard Pipe Thread Sizes
BSP thread names are also nominal. The thread OD will not equal the nominal name.
| BSP Thread Size Naming | Outside Diameter (mm / inch) | TPI |
|---|---|---|
| 1/16" BSP | 7.7 mm / 0.304" | 28 |
| 1/8" BSP | 9.7 mm / 0.383" | 28 |
| 1/4" BSP | 13.16 mm / 0.518" | 19 |
| 3/8" BSP | 16.66 mm / 0.656" | 19 |
| 1/2" BSP / 15 mm | 20.99 mm / 0.825" | 14 |
| 5/8" BSP | 22.99 mm / 0.902" | 14 |
| 3/4" BSP / 20 mm | 26.44 mm / 1.041" | 14 |
| 7/8" BSP | 30.20 mm / 1.189" | 14 |
| 1" BSP / 25 mm | 33.25 mm / 1.309" | 11 |
| 1-1/4" BSP | 41.91 mm / 1.650" | 11 |
| 1-1/2" BSP / 40 mm | 47.80 mm / 1.882" | 11 |
| 2" BSP / 50 mm | 59.61 mm / 2.347" | 11 |
| 2-1/4" BSP | 65.71 mm / 2.587" | 11 |
| 2-1/2" BSP | 75.18 mm / 2.960" | 11 |
| 3" BSP | 87.88 mm / 3.460" | 11 |
| 4" BSP | 113.03 mm / 4.450" | 11 |
| 5" BSP | 138.43 mm / 5.450" | 11 |
| 6" BSP | 163.83 mm / 6.450" | 11 |
Payment & Security
We accept: Visa, Mastercard, Amex, Apple Pay, Google Pay, ShopPay, Paypal, Zip, Afterpay
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
SP71404