{"product_id":"sc-sn-svm1-15a","title":"Spanet SV Mini 1 Controller Only - 15amp - Control Box","description":"\u003c!-- HASP-CANARY: SVMC-1.0 \/ sc-sn-svm1-15a \/ rev 2026-09-a --\u003e\n\u003c!-- HASP fitment model: SV Mini supply-lead rule (SLR-1.0). SpaPro\/WWDG fingerprint present. --\u003e\n\n\u003ch3\u003eSpanet SV Mini 1 Controller Only — 15amp Control Box\u003c\/h3\u003e\n\n\u003cp\u003eThe SpaNet PowerSMART SV Mini 1 control box on its own, fitted with a 3m lead and a 15 amp plug. This is the electronics enclosure only — the remote heater and the touchpad are separate items and are \u003cem\u003enot\u003c\/em\u003e included. Order this when the original SV Mini 1 box has failed, been water damaged or been hit by a surge, and the heater, touchpad, pumps and light are all still serviceable.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003ePhysically Stocked, unlike most 'drop-shipping' websites.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eShipped from VIC, NSW, WA, QLD\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e15amp or 10amp? Match it to the heater\u003c\/h3\u003e\n\n\u003cp\u003eThe SV Mini 1 comes in two supply configurations. The difference is the plug and lead fitted to the box, and that decides the heater size the circuit can carry. Check the rating label on your existing remote heater before ordering.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eIf your remote heater is\u003c\/th\u003e\n\u003cth\u003eOrder\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.0kW or 3.0kW\u003c\/td\u003e\n\u003ctd\u003eThis 15amp control box (SN-SVM1-15A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.5kW\u003c\/td\u003e\n\u003ctd\u003eThe \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/sc-sn-svm1-10a\"\u003e10amp control box\u003c\/a\u003e (SN-SVM1-10A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eA 15 amp plug has a larger earth pin than a 10 amp plug and will not fit a standard 10 amp outlet. A 15 amp outlet on a dedicated circuit is required — confirm the spa's existing supply before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the SV Mini 1 can run\u003c\/h3\u003e\n\n\u003cp\u003eThe SV Mini 1 is the single-pump member of the SV Mini family. Its 230V outlets are:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003ePUMP 1 — circulation pump, 1-speed pump or 2-speed pump. This is the pump that must push water through the heater.\u003c\/li\u003e\n\u003cli\u003eAUX — one 1-speed jet pump \u003cem\u003eor\u003c\/em\u003e one blower. Not both.\u003c\/li\u003e\n\u003cli\u003eO3\/UV — constant 230V outlet, intended for an ozone or UV sanitiser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf your spa runs two or three jet pumps plus a blower, the SV Mini 1 is the wrong size — step up to the \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/sc-sn-svm2\"\u003eSV Mini 2\u003c\/a\u003e or the \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/sc-sn-sv3-vh\"\u003eSpaNet SV3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eLow voltage ports\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e1 x touchpad port\u003c\/li\u003e\n\u003cli\u003e1 x light port — SpaNet SV series LED lights only (2.5\" or 5\")\u003c\/li\u003e\n\u003cli\u003e1 x heat pump port — plug-and-play to an SV series heat pump\u003c\/li\u003e\n\u003cli\u003e1 x WiFi port — for the SV SmartLINK module\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eIn-heater temperature sensor\u003c\/li\u003e\n\u003cli\u003eMaximum set temperature 41°C\u003c\/li\u003e\n\u003cli\u003eDynamic Thermal Tuning — the thermostat point adapts to the spa and its environment to cut demand heat cycling\u003c\/li\u003e\n\u003cli\u003eSmart Filtration — recognises filtration that happens during heating and trims the programmed cycles accordingly. Daily runtime programmable from 1 to 24 hours\u003c\/li\u003e\n\u003cli\u003eAuto daily sanitise cycle — runs pumps and blower in sequence to purge lines and sanitise the full water volume\u003c\/li\u003e\n\u003cli\u003eProgrammable sleep timer\u003c\/li\u003e\n\u003cli\u003eProgrammable load shedding\u003c\/li\u003e\n\u003cli\u003eHeat pump interface\u003c\/li\u003e\n\u003cli\u003eWiFi ready for SV SmartLINK and the SpaLINK app (iOS and Android)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eModel: SpaNet SV Mini 1 (SVM1)\u003c\/li\u003e\n\u003cli\u003ePart number: SN-SVM1-15A\u003c\/li\u003e\n\u003cli\u003eSupply: 230-240V AC, 1 phase, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eSupply lead: 3m, 15 amp plug fitted\u003c\/li\u003e\n\u003cli\u003eSuits remote heater: 2.0kW or 3.0kW\u003c\/li\u003e\n\u003cli\u003eMaximum controller load: 25A\u003c\/li\u003e\n\u003cli\u003eControl box: approx. 315mm W x 210mm H x 85mm D\u003c\/li\u003e\n\u003cli\u003eHeater and touchpad: not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpa control systems this replaces\u003c\/h3\u003e\n\n\u003cp\u003eThe SV Mini 1 is SpaNet's standard retrofit for small and mid-size spas running one filtration pump plus one accessory. It is commonly fitted in place of:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSpaNet XS-2000 (obsolete and no longer supported)\u003c\/li\u003e\n\u003cli\u003eDavey Spa-Quip (SpaQuip) SP400 and similar single-pump packs\u003c\/li\u003e\n\u003cli\u003eAmpac \/ Pulsar SQ series and Monarch-era controls\u003c\/li\u003e\n\u003cli\u003eGecko MicroSpa and U-Class packs on single-pump spas\u003c\/li\u003e\n\u003cli\u003eSpaPro and WWDG single-pump control systems where the original board is no longer available\u003c\/li\u003e\n\u003cli\u003eUnbranded and OEM-rebadged packs on Sapphire, Oasis, Vortex, Alpine, Sunrans and similar imported spas, provided the pump count matches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eA retrofit is not a like-for-like swap. Pump cordsets, the touchpad cut-out and the light will usually all need attention — see the parts list below.\u003c\/p\u003e\n\n\u003ch3\u003eParts you may also need\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSV Mini remote heater to match this 15amp box: \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-mini-remote-heater-2-0kw-sv-mini-1-2\"\u003e2.0kW\u003c\/a\u003e or \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-mini-remote-heater-3-0kw-sv-mini-1-2\"\u003e3.0kW\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-mini-touchpads-sv-mini-1-sv-mini-2\"\u003eSV Mini 1 rectangular touchpad\u003c\/a\u003e or the \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/sc-sn-sv-mt-b-1\"\u003eSV Mini 1 bone touchpad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-mini-sv-touchpad-adaptor-plate-facia\"\u003eTouchpad adaptor facia\u003c\/a\u003e — covers the old touchpad hole on a retrofit\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/overmoulded-amp-lead-kit\"\u003eOvermoulded AMP cordsets\u003c\/a\u003e — 3-wire for 1-speed pumps, blowers and ozone; 4-wire for 2-speed pumps\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-xs-or-sv-mini-heater-barrel-union\"\u003eSV Mini heater barrel union\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-smartlink-wifi-module\"\u003eSV SmartLINK WiFi module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eSpaNet SV LED lights: \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-led-light-colour-changing-for-sv-series\"\u003e2.5\" \/ 63mm\u003c\/a\u003e, \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-sv-led-light-colour-changing-5\"\u003e5\"\u003c\/a\u003e, or \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-sv-led-light-colour-changing-light-only\"\u003elight only\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrefer the complete package? See the \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spanet-mini-1\"\u003eSV Mini 1 retrofit kit\u003c\/a\u003e with heater and touchpad included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eQuestions we get asked\u003c\/h3\u003e\n\n\u003cp\u003eDoes this include the heater?\u003cbr\u003e\nNo. The SV Mini 1 uses a remote heater that plugs into the control box, and it is sold separately. This 15amp box pairs with the 2.0kW or 3.0kW heater.\u003c\/p\u003e\n\n\u003cp\u003eDoes it include a touchpad?\u003cbr\u003e\nNo. SV Mini 1 touchpads are 6-button and are ordered separately in rectangular or bone.\u003c\/p\u003e\n\n\u003cp\u003eCan I plug a 15 amp lead into a normal power point?\u003cbr\u003e\nNo. The 15 amp plug has a wider earth pin and requires a 15 amp outlet on its own circuit. If the spa only has a 10 amp supply, the \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/sc-sn-svm1-10a\"\u003e10amp version\u003c\/a\u003e with a 1.5kW heater is the correct choice.\u003c\/p\u003e\n\n\u003cp\u003eCan I use my existing spa light?\u003cbr\u003e\nOnly if it is a SpaNet SV series LED light. Older 2-wire lights and other brands will not run from the SV Mini light port. If you have an older SpaNet round-pin light plug it can be re-terminated to RJ — see the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0372\/5253\/files\/SV_Tech_Note_Change_XS_light_to_suit_SV_Mini_RJ12.pdf?v=1700429616\"\u003eSpaNet tech note\u003c\/a\u003e. Otherwise fit a new SV series light.\u003c\/p\u003e\n\n\u003cp\u003eWill a SV Mini 2 touchpad work on this?\u003cbr\u003e\nNo. The SV Mini 1 takes the 6-button touchpad; the SV Mini 2 takes the 8-button. They are not interchangeable.\u003c\/p\u003e\n\n\u003cp\u003eMy old system had two jet pumps and a blower. Will this work?\u003cbr\u003e\nNo. The SV Mini 1 has one auxiliary outlet. You need the SV Mini 2 or an SV3.\u003c\/p\u003e\n\n\u003cp\u003eIs the board repairable instead?\u003cbr\u003e\nSometimes. We offer a \u003ca href=\"https:\/\/heaterandspaparts.com.au\/products\/spa-controller-repairs\"\u003espa controller repair assessment\u003c\/a\u003e for SpaNet Mini 1, Mini 2, SV2, SV3 and SV4 systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0372\/5253\/files\/SV-Mini-User-Manual-1704.pdf?v=1702945804\"\u003eSV Mini installation and user manual\u003c\/a\u003e. \u003cstrong\u003eConfirm the product is correct before ordering. \u003ca href=\"https:\/\/heaterandspaparts.com.au\/pages\/contact-us\"\u003eContact us\u003c\/a\u003e if unsure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCommon search terms\u003c\/h3\u003e\n\n\u003cp\u003eSpanet SV Mini 1 controller only, SN-SVM1-15A, SVM1, SV Mini 1 control box, Spanet mini control box 15 amp, Spanet SV Mini 1 replacement controller, XS-2000 replacement controller, Spanet mini 1 pack, Spanet spa controller box, PowerSMART SV Mini 1, SpaPro control box replacement, WWDG spa control box.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTo be fitted by a licensed, qualified and experienced person.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003c!-- HASP-CANARY-END: if this comment appears on a third-party domain, the page was copied from heaterandspaparts.com.au --\u003e","brand":"SpaNet","offers":[{"title":"Default Title","offer_id":46981179343037,"sku":"SN-SVM1-15A","price":810.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/5253\/files\/spanet-sv-mini-1-controller-only-15amp-control-box-551.webp?v=1789277885","url":"https:\/\/hasp.com.au\/products\/sc-sn-svm1-15a","provider":"Heater and Spa Parts","version":"1.0","type":"link"}