{"product_id":"aqua-flo-xp2-impeller-2hp-91694300","title":"Aqua-Flo XP2 2.0hp Impeller (3hp USA) - 91694300","description":"\u003c!-- HASP-FLP-1.0 | SKU g-91694300 | rule XP2IMP-1.0 | canary: xp2-dots-by-size --\u003e\n\u003ch3\u003eAqua-Flo XP2 2.0hp Jet Booster Pump Impeller, 3hp USA, Part 91694300\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eAqua-Flo (Aquaflo) XP2 impeller\u003c\/strong\u003e for the \u003cstrong\u003e2.0hp Australian 50Hz\u003c\/strong\u003e Flo-Master XP2 spa jet booster pump, marked \u003cstrong\u003e3.0hp\u003c\/strong\u003e on 60Hz USA pumps. Part number \u003cstrong\u003e91694300\u003c\/strong\u003e, identified by \u003cstrong\u003etwo green dots\u003c\/strong\u003e on the impeller shaft sleeve. This is the \u003cstrong\u003esecond most common XP2 impeller\u003c\/strong\u003e on Australian spas, after the \u003ca href=\"\/products\/aqua-flo-xp2-impellers\"\u003e2.5hp 91694400\u003c\/a\u003e. The XP2 and XP2E are different pumps and their impellers are not interchangeable, so if yours is an XP2E see the \u003ca href=\"\/products\/aqua-flo-xp2e-jet-booster-impellers\"\u003eXP2E impeller range\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003ePhysically Stocked, unlike most \"drop-shipping\" websites.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eShipped from VIC, NSW, WA, QLD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdentify Your Impeller Before You Order (rule XP2IMP-1.0)\u003c\/h3\u003e\n\u003cp\u003eAqua-Flo size XP2 impellers by \u003cstrong\u003ecoloured dots on the impeller shaft sleeve\u003c\/strong\u003e, which protrudes from the back of the wet end. Confirm on the dots and the vane width rather than on horsepower alone:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead the pump label.\u003c\/strong\u003e Australian 50Hz and USA 60Hz pumps are rated differently. This impeller suits a pump labelled \u003cstrong\u003e2.0hp in Australia\u003c\/strong\u003e or \u003cstrong\u003e3.0hp in the USA\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFind the dots on the shaft sleeve.\u003c\/strong\u003e This impeller carries \u003cstrong\u003etwo green dots\u003c\/strong\u003e on the rear of the shaft sleeve, visible where it protrudes from the back of the wet end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the old impeller across the outside of the vanes.\u003c\/strong\u003e This one is \u003cstrong\u003e112mm diameter\u003c\/strong\u003e with a \u003cstrong\u003e10.7mm vane width\u003c\/strong\u003e. The 1.5hp is also 112mm but has a much narrower 7mm vane, so check the vane width as well as the diameter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 91694300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e Aqua-Flo Flo-Master XP2 spa jet booster pump, 2.0hp AU 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSA 60Hz equivalent:\u003c\/strong\u003e 3.0hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft sleeve marking:\u003c\/strong\u003e two green dots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 112mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVane width:\u003c\/strong\u003e 10.7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Aqua-Flo, Gecko Alliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose Your XP2 Size\u003c\/h3\u003e\n\u003cp\u003eYou are viewing the \u003cstrong\u003e2.0hp, part 91694300\u003c\/strong\u003e. Aqua-Flo list six XP2 impellers:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSize (AU 50Hz)\u003c\/th\u003e\n\u003cth\u003eUSA 60Hz\u003c\/th\u003e\n\u003cth\u003eShaft sleeve dots\u003c\/th\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003cth\u003eVane width\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aqua-flo-xp2-impeller-0-75hp-91694110\"\u003e0.75hp - 91694110\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.0hp\u003c\/td\u003e\n\u003ctd\u003e1 orange\u003c\/td\u003e\n\u003ctd\u003e98mm, 7 vanes\u003c\/td\u003e\n\u003ctd\u003e7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aqua-flo-xp2-impeller-1hp-91694150\"\u003e1.0hp - 91694150\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5hp\u003c\/td\u003e\n\u003ctd\u003eblue, green and yellow\u003c\/td\u003e\n\u003ctd\u003e103mm, 7 vanes\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aqua-flo-xp2-impeller-1-5hp-91694200\"\u003e1.5hp - 91694200\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0hp\u003c\/td\u003e\n\u003ctd\u003e2 blue\u003c\/td\u003e\n\u003ctd\u003e112mm\u003c\/td\u003e\n\u003ctd\u003e7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aqua-flo-xp2-impeller-1-75hp-91694251\"\u003e1.75hp - 91694251\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5hp\u003c\/td\u003e\n\u003ctd\u003e2 white\u003c\/td\u003e\n\u003ctd\u003enot recorded\u003c\/td\u003e\n\u003ctd\u003e8.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aqua-flo-xp2-impeller-2hp-91694300\"\u003e2.0hp - 91694300\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3.0hp\u003c\/td\u003e\n\u003ctd\u003e2 green\u003c\/td\u003e\n\u003ctd\u003e112mm\u003c\/td\u003e\n\u003ctd\u003e10.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aqua-flo-xp2-impellers\"\u003e2.5hp - 91694400\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4.0hp\u003c\/td\u003e\n\u003ctd\u003e2 white with 1 green between\u003c\/td\u003e\n\u003ctd\u003e114mm\u003c\/td\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe \u003cstrong\u003e2.5hp 91694400\u003c\/strong\u003e is the most common XP2 impeller on Australian spas and this \u003cstrong\u003e2.0hp 91694300\u003c\/strong\u003e is the second most common. The 2.5hp is also quoted as \u003cstrong\u003e4.8BHP\u003c\/strong\u003e on some Spa Industries spas. The 1.75hp was not fitted to current Australian 50Hz pumps but was used on Aquaswim pumps in the past.\u003c\/p\u003e\n\u003ch3\u003eRelated XP2 Parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical seal, 5\/8\" Type 6\u003c\/strong\u003e - fit a new seal whenever the impeller comes off (\u003ca href=\"\/products\/5-8-type-6-mechanical-seal-aquaflo-waterway-piranha\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear ring 92830070\u003c\/strong\u003e - flanged wear ring for the XP2 series (\u003ca href=\"\/products\/wear-ring-for-aqua-flo-flo-master-xp2-series-pumps\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody o-ring 92200300\u003c\/strong\u003e - wet end body seal, XP2 and XP2E (\u003ca href=\"\/products\/body-o-ring-for-aquaflo-xp2-xp2e-jet-booster-pump-all-sizes\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnion o-ring 92200210\u003c\/strong\u003e - pump union seal, XP2 and XP2E (\u003ca href=\"\/products\/aquaflo-xp2-xp2e-waterway-pump-union-o-ring\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\" pump union and o-ring\u003c\/strong\u003e (\u003ca href=\"\/products\/sc-c-21023-000-000\"\u003ebuy here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump itself discontinued?\u003c\/strong\u003e See the \u003ca href=\"\/products\/aqua-flo-xp2-xp2e-obsolete-replacement-guide\"\u003eAqua-Flo XP2 and XP2E obsolete pump replacement guide\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cp\u003eReplace the impeller when the vanes are worn, chipped or broken, when the throat has worn oversize, or when jet pressure has fallen away with a clean filter and no air leak. A worn impeller and a worn wear ring usually go together, so check both while the wet end is open. Always fit a new mechanical seal at the same time, because the seal faces bed in against each other and generally leak once disturbed.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm this is the 2.0hp impeller?\u003c\/strong\u003e\u003cbr\u003eLook for two green dots on the rear of the impeller shaft sleeve where it protrudes from the back of the wet end, and measure the impeller at about 112mm across the outside of the vanes with a 10.7mm vane width.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe 1.5hp and the 2.0hp are both 112mm. How do I tell them apart?\u003c\/strong\u003e\u003cbr\u003eBy the dots and the vane width. The 2.0hp carries two green dots and a 10.7mm vane. The 1.5hp carries two blue dots and a much narrower 7mm vane.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy pump label says 3.0hp. Is this the right impeller?\u003c\/strong\u003e\u003cbr\u003eYes, if it is a USA 60Hz pump. Australian 50Hz pumps do not use a 3.0hp label on the XP2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit an XP2E pump?\u003c\/strong\u003e\u003cbr\u003eNo. The XP2 and XP2E use different impellers. See the \u003ca href=\"\/products\/aqua-flo-xp2e-jet-booster-impellers\"\u003eXP2E impeller range\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e confirm this part is correct for your equipment. Seek professional assistance, or \u003ca href=\"mailto:shop@hasp.com.au\"\u003econtact us\u003c\/a\u003e with photos of your existing impeller and the pump label, including model and serial numbers. As with all products, this must be diagnosed and fitted by a qualified and experienced person.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCommon search terms: Aqua-Flo 91694300, Aquaflo 91694300, XP2 2hp impeller, XP2 3hp impeller USA, Flo-Master XP2 impeller two green dots, 112mm spa pump impeller, Aquaflo jet pump impeller, WWDG SpaPro.\u003c\/em\u003e\u003c\/p\u003e\n\u003c!-- HASP-FLP-1.0 end | canary: xp2-dots-by-size --\u003e","brand":"AquaFlo","offers":[{"title":"Default Title","offer_id":68406444130493,"sku":"g-91694300","price":158.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0372\/5253\/files\/aqua-flo-xp2-2-0hp-impeller-3hp-usa-91694300-general-674.webp?v=1795065133","url":"https:\/\/hasp.com.au\/products\/aqua-flo-xp2-impeller-2hp-91694300","provider":"Heater and Spa Parts","version":"1.0","type":"link"}